High Density Block Making Machine
HDM - 1000DLX
In this High Density Concrete Block Making Machine, wooden or steel pallets fed and located by the chain conveyor, on high frequency vibrating table. Mould is filled manually which is over the pallet. The mix is pressed and vibrated on both sides simultaneously, resulting in voids free, high density blocks with excellent texture and finish.
The blocks thus formed are voids free, 30% more denser which makes the block less water obsorbtion and manifold increase in stsrength which is not at all achievable in egg laying and hand operated machines.
Formed blocks are dragged away from the machine by the chain conveyor and handled manually.
Technical Specifications
1. Production Capacity ( 50 - 60 Strokes/hour)
* Indicative only. Actual production rate depends upon the operator efficiency, mix feeding and mix design. Weigh batching, pallet & block handling, steam curing systems can be supplied to the required level of automation of the customers.
No. of blocks per stroke
| 200 x 200 x 400 mm |
2/3 Nos. |
| 150 x 200 x 400 mm |
3/4 Nos. |
| 100 x 200 x 400 |
4/6 Nos. |
| 230 x 110 x 75 |
10 Nos. |
| Pavement Blocks |
2 Sq.feet |
| Total power required |
27 H.P |
|
| 2. Hydraulic pump Motor |
5 H.P. 1440 rpm |
| 3. Mould Table Vibrator 5 HP x 2 |
10 H.P. 6000 rpm |
| 4. Ram Vibrator 5 HP x 2 |
10 H.P. 6000 rpm |
| 5. Conveyor Chain Drive |
2 H.P. 1440 rpm |
| 6. Mould Table Size |
600 x 800 m.m |
| 7.Hydraulic Load Developed & Applied on Concrete blocks by Ram |
4000 kg |
| 8. Mix Feeding (For pavement blocks anothefr side feed is used for fine or colour mix for top surface) |
Manual, from two sides |
| 9. Steel Pallet Feeding and Removal with blocks |
Manual / Mechanical |
|