Hydraulic Concrete Block Making Machine
                                          

It is an egg laying type Hydraulic Concrete Block Making Machine on wheels, which will lay blocks on the concrete floor and move to the next laying. Any type of concrete blocks can be produced with consistent quality by fixing different types of concrete mould and ram into the machine. Our new spares are readily available to replace the wearing parts which are interchangeable..

Formed blocks are dragged away from the machine by the chain conveyor and handled manually.

It is an egg laying type Hydraulic Concrete Block Making Machine on wheels, which will lay blocks on the concrete floor and move to the next laying. Any type of concrete blocks can be produced with consistent quality by fixing different types of concrete mould and ram into the machine. Our new spares are readily available to replace the wearing parts which are interchangeable.

Single Vibrator System    A regular machine with one vibrator to the mould.
Double Vibrator System Excisting single vibrator mould machine can be converted into Double Vibrator System by adding one more vibrator to the mould.
Triple Vibrator System  
The concrete in the mould is heavily compacted by applying vibrations from top through ram and double vibrator at the mould. Highly compacted locks bring very good compressive strength, low water absorption even at lean mix ratios.

Customers can avail the expertise developed through years of practical experience, from our technically qualified personnel in putting up the plant, right from the layout upto marketing of the blocks.

Double and Triple Vibrator System

                                        


The concrete in the mould is heavily compacted by applying vibrations from top through ram and double vibrator at the mould. Highly compacted blocks bring very good compressive strength, low water absorption even at lean mix ratios.

SPECIFICATIONS: Single Vibrator System Double Vibrator System Triple Vibrator System
       
1. Power (Total) 5 h.p. - 3 Phase 6.5 h.p. - 3 Phase 8 h.p. - 3 phase
    Hydraulic pump 3 h.p. - 1440 r.p.m 3 h.p. - 1440 r.p.m 3 h.p. - 1440 r.p.m
    Vibrator : Mould 1.5 h.p. - 2800 r.p.m. 1.5 h.p. X 2 - 2800 r.p.m. 1.5 h.p.X 2 - 2800 r.p.m.
                   Ram
---
---
 1.5 h.p X 1 - 2800 r.p.m
    Propeltion 0.5 h.p. - 1440 r.p.m. 0.5 h.p. - 1440 r.p.m. 1.5 h.p. - 1440 r.p.m.
       
2. Weight (Approx) 900 Kg without mould (approx) 500 Kg 500 K.g
     Without Mould      
       
3. Operating Pressure 140 Kg / Cm2 - -
       
4. Vibrations 6000 HZ. Amplitude Adjustable 6000VPM Amplitude Adjustable 6000VPM Amplitude Adjustable
       
5. Drive 25 : 1 Worm reduction Gear box and chain through front wheel - -
       
6. Moulding area 860 x 600 mm 860 x 600 mm 860 x 600 mm
       
8. Dimentions 2000 x 1500 x 2000 mm 2000 x 1500 x 2000 mm 2000 x 1500 x 2000 mm
       
9. Capacity 50 to 60 Strokes / hour

200 x 200 x 400 mm 4 blocks/strokes - 200 to 240 Nos./ hour

150 x 200 x 400 mm 5 blocks/strokes - 250 to 300 Nos./ hour

100 x 200 x 400 mm 8 blocks/strokes - 400 to 480 Nos./ hour 		50 to 60 Strokes / hour

200 x 200 x 400 mm (8 inch)blocks -200 to 240/hour

150 x 200 x 400 mm (6 inch)blocks -250 to 300/hour

200 x 200 x 400 mm (8 inch)blocks -400 to 480/hour
50 to 60 Strokes / hour

Any mould which is drawable can be fitted in the machine.
Delivery 1 week.